Distribution
- class aws_cdk.aws_cloudfront.Distribution(scope, id, *, default_behavior, additional_behaviors=None, certificate=None, comment=None, default_root_object=None, domain_names=None, enabled=None, enable_ipv6=None, enable_logging=None, error_responses=None, geo_restriction=None, http_version=None, log_bucket=None, log_file_prefix=None, log_includes_cookies=None, minimum_protocol_version=None, price_class=None, publish_additional_metrics=None, ssl_support_method=None, web_acl_id=None)
Bases:
Resource
A CloudFront distribution with associated origin(s) and caching behavior(s).
- ExampleMetadata:
infused
Example:
# Adding an existing Lambda@Edge function created in a different stack # to a CloudFront distribution. # s3_bucket: s3.Bucket function_version = lambda_.Version.from_version_arn(self, "Version", "arn:aws:lambda:us-east-1:123456789012:function:functionName:1") cloudfront.Distribution(self, "distro", default_behavior=cloudfront.BehaviorOptions( origin=origins.S3Origin(s3_bucket), edge_lambdas=[cloudfront.EdgeLambda( function_version=function_version, event_type=cloudfront.LambdaEdgeEventType.VIEWER_REQUEST ) ] ) )
- Parameters:
scope (
Construct
) –id (
str
) –default_behavior (
Union
[BehaviorOptions
,Dict
[str
,Any
]]) – The default behavior for the distribution.additional_behaviors (
Optional
[Mapping
[str
,Union
[BehaviorOptions
,Dict
[str
,Any
]]]]) – Additional behaviors for the distribution, mapped by the pathPattern that specifies which requests to apply the behavior to. Default: - no additional behaviors are added.certificate (
Optional
[ICertificate
]) – A certificate to associate with the distribution. The certificate must be located in N. Virginia (us-east-1). Default: - the CloudFront wildcard certificate (*.cloudfront.net) will be used.comment (
Optional
[str
]) – Any comments you want to include about the distribution. Default: - no commentdefault_root_object (
Optional
[str
]) – The object that you want CloudFront to request from your origin (for example, index.html) when a viewer requests the root URL for your distribution. If no default object is set, the request goes to the origin’s root (e.g., example.com/). Default: - no default root objectdomain_names (
Optional
[Sequence
[str
]]) – Alternative domain names for this distribution. If you want to use your own domain name, such as www.example.com, instead of the cloudfront.net domain name, you can add an alternate domain name to your distribution. If you attach a certificate to the distribution, you should add (at least one of) the domain names of the certificate to this list. When you want to move a domain name between distributions, you can associate a certificate without specifying any domain names. For more information, see the Moving an alternate domain name to a different distribution section in the README. Default: - The distribution will only support the default generated name (e.g., d111111abcdef8.cloudfront.net)enabled (
Optional
[bool
]) – Enable or disable the distribution. Default: trueenable_ipv6 (
Optional
[bool
]) – Whether CloudFront will respond to IPv6 DNS requests with an IPv6 address. If you specify false, CloudFront responds to IPv6 DNS requests with the DNS response code NOERROR and with no IP addresses. This allows viewers to submit a second request, for an IPv4 address for your distribution. Default: trueenable_logging (
Optional
[bool
]) – Enable access logging for the distribution. Default: - false, unlesslogBucket
is specified.error_responses (
Optional
[Sequence
[Union
[ErrorResponse
,Dict
[str
,Any
]]]]) – How CloudFront should handle requests that are not successful (e.g., PageNotFound). Default: - No custom error responses.geo_restriction (
Optional
[GeoRestriction
]) – Controls the countries in which your content is distributed. Default: - No geographic restrictionshttp_version (
Optional
[HttpVersion
]) – Specify the maximum HTTP version that you want viewers to use to communicate with CloudFront. For viewers and CloudFront to use HTTP/2, viewers must support TLS 1.2 or later, and must support server name identification (SNI). Default: HttpVersion.HTTP2log_bucket (
Optional
[IBucket
]) – The Amazon S3 bucket to store the access logs in. Make sure to setobjectOwnership
tos3.ObjectOwnership.OBJECT_WRITER
in your custom bucket. Default: - A bucket is created ifenableLogging
is truelog_file_prefix (
Optional
[str
]) – An optional string that you want CloudFront to prefix to the access log filenames for this distribution. Default: - no prefixlog_includes_cookies (
Optional
[bool
]) – Specifies whether you want CloudFront to include cookies in access logs. Default: falseminimum_protocol_version (
Optional
[SecurityPolicyProtocol
]) – The minimum version of the SSL protocol that you want CloudFront to use for HTTPS connections. CloudFront serves your objects only to browsers or devices that support at least the SSL version that you specify. Default: - SecurityPolicyProtocol.TLS_V1_2_2021 if the ‘@aws-cdk/aws-cloudfront:defaultSecurityPolicyTLSv1.2_2021’ feature flag is set; otherwise, SecurityPolicyProtocol.TLS_V1_2_2019.price_class (
Optional
[PriceClass
]) – The price class that corresponds with the maximum price that you want to pay for CloudFront service. If you specify PriceClass_All, CloudFront responds to requests for your objects from all CloudFront edge locations. If you specify a price class other than PriceClass_All, CloudFront serves your objects from the CloudFront edge location that has the lowest latency among the edge locations in your price class. Default: PriceClass.PRICE_CLASS_ALLpublish_additional_metrics (
Optional
[bool
]) – Whether to enable additional CloudWatch metrics. Default: falsessl_support_method (
Optional
[SSLMethod
]) – The SSL method CloudFront will use for your distribution. Server Name Indication (SNI) - is an extension to the TLS computer networking protocol by which a client indicates which hostname it is attempting to connect to at the start of the handshaking process. This allows a server to present multiple certificates on the same IP address and TCP port number and hence allows multiple secure (HTTPS) websites (or any other service over TLS) to be served by the same IP address without requiring all those sites to use the same certificate. CloudFront can use SNI to host multiple distributions on the same IP - which a large majority of clients will support. If your clients cannot support SNI however - CloudFront can use dedicated IPs for your distribution - but there is a prorated monthly charge for using this feature. By default, we use SNI - but you can optionally enable dedicated IPs (VIP). See the CloudFront SSL for more details about pricing : https://aws.amazon.com/cloudfront/custom-ssl-domains/ Default: SSLMethod.SNIweb_acl_id (
Optional
[str
]) – Unique identifier that specifies the AWS WAF web ACL to associate with this CloudFront distribution. To specify a web ACL created using the latest version of AWS WAF, use the ACL ARN, for examplearn:aws:wafv2:us-east-1:123456789012:global/webacl/ExampleWebACL/473e64fd-f30b-4765-81a0-62ad96dd167a
. To specify a web ACL created using AWS WAF Classic, use the ACL ID, for example473e64fd-f30b-4765-81a0-62ad96dd167a
. Default: - No AWS Web Application Firewall web access control list (web ACL).
Methods
- add_behavior(path_pattern, origin, *, allowed_methods=None, cached_methods=None, cache_policy=None, compress=None, edge_lambdas=None, function_associations=None, origin_request_policy=None, realtime_log_config=None, response_headers_policy=None, smooth_streaming=None, trusted_key_groups=None, viewer_protocol_policy=None)
Adds a new behavior to this distribution for the given pathPattern.
- Parameters:
path_pattern (
str
) – the path pattern (e.g., ‘images/*’) that specifies which requests to apply the behavior to.origin (
IOrigin
) – the origin to use for this behavior.allowed_methods (
Optional
[AllowedMethods
]) – HTTP methods to allow for this behavior. Default: AllowedMethods.ALLOW_GET_HEADcached_methods (
Optional
[CachedMethods
]) – HTTP methods to cache for this behavior. Default: CachedMethods.CACHE_GET_HEADcache_policy (
Optional
[ICachePolicy
]) – The cache policy for this behavior. The cache policy determines what values are included in the cache key, and the time-to-live (TTL) values for the cache. Default: CachePolicy.CACHING_OPTIMIZEDcompress (
Optional
[bool
]) – Whether you want CloudFront to automatically compress certain files for this cache behavior. See https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/ServingCompressedFiles.html#compressed-content-cloudfront-file-types for file types CloudFront will compress. Default: trueedge_lambdas (
Optional
[Sequence
[Union
[EdgeLambda
,Dict
[str
,Any
]]]]) – The Lambda@Edge functions to invoke before serving the contents. Default: - no Lambda functions will be invokedfunction_associations (
Optional
[Sequence
[Union
[FunctionAssociation
,Dict
[str
,Any
]]]]) – The CloudFront functions to invoke before serving the contents. Default: - no functions will be invokedorigin_request_policy (
Optional
[IOriginRequestPolicy
]) – The origin request policy for this behavior. The origin request policy determines which values (e.g., headers, cookies) are included in requests that CloudFront sends to the origin. Default: - nonerealtime_log_config (
Optional
[IRealtimeLogConfig
]) – The real-time log configuration to be attached to this cache behavior. Default: - noneresponse_headers_policy (
Optional
[IResponseHeadersPolicy
]) – The response headers policy for this behavior. The response headers policy determines which headers are included in responses Default: - nonesmooth_streaming (
Optional
[bool
]) – Set this to true to indicate you want to distribute media files in the Microsoft Smooth Streaming format using this behavior. Default: falsetrusted_key_groups (
Optional
[Sequence
[IKeyGroup
]]) – A list of Key Groups that CloudFront can use to validate signed URLs or signed cookies. Default: - no KeyGroups are associated with cache behaviorviewer_protocol_policy (
Optional
[ViewerProtocolPolicy
]) – The protocol that viewers can use to access the files controlled by this behavior. Default: ViewerProtocolPolicy.ALLOW_ALL
- Return type:
None
- apply_removal_policy(policy)
Apply the given removal policy to this resource.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.
The resource can be deleted (
RemovalPolicy.DESTROY
), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN
).- Parameters:
policy (
RemovalPolicy
) –- Return type:
None
- grant(identity, *actions)
Adds an IAM policy statement associated with this distribution to an IAM principal’s policy.
- Parameters:
identity (
IGrantable
) – The principal.actions (
str
) – The set of actions to allow (i.e. “cloudfront:ListInvalidations”).
- Return type:
- grant_create_invalidation(identity)
Grant to create invalidations for this bucket to an IAM principal (Role/Group/User).
- Parameters:
identity (
IGrantable
) – The principal.- Return type:
- metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Return the given named metric for this Distribution.
- Parameters:
metric_name (
str
) –account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No labelperiod (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Return type:
- metric401_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 401.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric403_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 403.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric404_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 404.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric4xx_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 4xx.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric502_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 502.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric503_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 503.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric504_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 504.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric5xx_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 5xx.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric_bytes_downloaded(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the total number of bytes downloaded by viewers for GET, HEAD, and OPTIONS requests.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
sum over 5 minutes
- Return type:
- metric_bytes_uploaded(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the total number of bytes that viewers uploaded to your origin with CloudFront, using POST and PUT requests.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
sum over 5 minutes
- Return type:
- metric_cache_hit_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all cacheable requests for which CloudFront served the content from its cache.
HTTP POST and PUT requests, and errors, are not considered cacheable requests.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric_origin_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the total time spent from when CloudFront receives a request to when it starts providing a response to the network (not the viewer), for requests that are served from the origin, not the CloudFront cache.
This is also known as first byte latency, or time-to-first-byte.
To obtain this metric, you need to set
publishAdditionalMetrics
totrue
.- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- metric_requests(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the total number of viewer requests received by CloudFront, for all HTTP methods and for both HTTP and HTTPS requests.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
sum over 5 minutes
- Return type:
- metric_total_error_rate(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)
Metric for the percentage of all viewer requests for which the response’s HTTP status code is 4xx or 5xx.
- Parameters:
account (
Optional
[str
]) – Account which this metric comes from. Default: - Deployment account.color (
Optional
[str
]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. TheColor
class has a set of standard colors that can be used here. Default: - Automatic colordimensions_map (
Optional
[Mapping
[str
,str
]]) – Dimensions of the metric. Default: - No dimensions.label (
Optional
[str
]) –Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (
Optional
[Duration
]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)region (
Optional
[str
]) – Region which this metric comes from. Default: - Deployment region.statistic (
Optional
[str
]) – What function to use for aggregating. Use theaws_cloudwatch.Stats
helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Averageunit (
Optional
[Unit
]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream
- Default:
average over 5 minutes
- Return type:
- to_string()
Returns a string representation of this construct.
- Return type:
str
Attributes
- distribution_domain_name
The domain name of the Distribution, such as d111111abcdef8.cloudfront.net.
- distribution_id
The distribution ID for this distribution.
- domain_name
The domain name of the Distribution, such as d111111abcdef8.cloudfront.net.
- env
The environment this resource belongs to.
For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.
- node
The tree node.
- stack
The stack in which this resource is defined.
Static Methods
- classmethod from_distribution_attributes(scope, id, *, distribution_id, domain_name)
Creates a Distribution construct that represents an external (imported) distribution.
- Parameters:
scope (
Construct
) –id (
str
) –distribution_id (
str
) – The distribution ID for this distribution.domain_name (
str
) – The generated domain name of the Distribution, such as d111111abcdef8.cloudfront.net.
- Return type:
- classmethod is_construct(x)
Checks if
x
is a construct.Use this method instead of
instanceof
to properly detectConstruct
instances, even when the construct library is symlinked.Explanation: in JavaScript, multiple copies of the
constructs
library on disk are seen as independent, completely different libraries. As a consequence, the classConstruct
in each copy of theconstructs
library is seen as a different class, and an instance of one class will not test asinstanceof
the other class.npm install
will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of theconstructs
library can be accidentally installed, andinstanceof
will behave unpredictably. It is safest to avoid usinginstanceof
, and using this type-testing method instead.- Parameters:
x (
Any
) – Any object.- Return type:
bool
- Returns:
true if
x
is an object created from a class which extendsConstruct
.
- classmethod is_owned_resource(construct)
Returns true if the construct was created by CDK, and false otherwise.
- Parameters:
construct (
IConstruct
) –- Return type:
bool
- classmethod is_resource(construct)
Check whether the given construct is a Resource.
- Parameters:
construct (
IConstruct
) –- Return type:
bool