CfnReplicationGroup

class aws_cdk.aws_elasticache.CfnReplicationGroup(scope, id, *, replication_group_description, at_rest_encryption_enabled=None, auth_token=None, automatic_failover_enabled=None, auto_minor_version_upgrade=None, cache_node_type=None, cache_parameter_group_name=None, cache_security_group_names=None, cache_subnet_group_name=None, cluster_mode=None, data_tiering_enabled=None, engine=None, engine_version=None, global_replication_group_id=None, ip_discovery=None, kms_key_id=None, log_delivery_configurations=None, multi_az_enabled=None, network_type=None, node_group_configuration=None, notification_topic_arn=None, num_cache_clusters=None, num_node_groups=None, port=None, preferred_cache_cluster_a_zs=None, preferred_maintenance_window=None, primary_cluster_id=None, replicas_per_node_group=None, replication_group_id=None, security_group_ids=None, snapshot_arns=None, snapshot_name=None, snapshot_retention_limit=None, snapshotting_cluster_id=None, snapshot_window=None, tags=None, transit_encryption_enabled=None, transit_encryption_mode=None, user_group_ids=None)

Bases: CfnResource

The AWS::ElastiCache::ReplicationGroup resource creates an Amazon ElastiCache (Redis OSS) replication group.

A Redis OSS (cluster mode disabled) replication group is a collection of cache clusters, where one of the clusters is a primary read-write cluster and the others are read-only replicas.

A Redis OSS (cluster mode enabled) cluster is comprised of from 1 to 90 shards (API/CLI: node groups). Each shard has a primary node and up to 5 read-only replica nodes. The configuration can range from 90 shards and 0 replicas to 15 shards and 5 replicas, which is the maximum number or replicas allowed.

The node or shard limit can be increased to a maximum of 500 per cluster if the Redis OSS engine version is 5.0.6 or higher. For example, you can choose to configure a 500 node cluster that ranges between 83 shards (one primary and 5 replicas per shard) and 500 shards (single primary and no replicas). Make sure there are enough available IP addresses to accommodate the increase. Common pitfalls include the subnets in the subnet group have too small a CIDR range or the subnets are shared and heavily used by other clusters. For more information, see Creating a Subnet Group . For versions below 5.0.6, the limit is 250 per cluster.

To request a limit increase, see Amazon Service Limits and choose the limit type Nodes per cluster per instance type .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html
CloudformationResource:: AWS::ElastiCache::ReplicationGroup
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

cfn_replication_group = elasticache.CfnReplicationGroup(self, "MyCfnReplicationGroup",
    replication_group_description="replicationGroupDescription",

    # the properties below are optional
    at_rest_encryption_enabled=False,
    auth_token="authToken",
    automatic_failover_enabled=False,
    auto_minor_version_upgrade=False,
    cache_node_type="cacheNodeType",
    cache_parameter_group_name="cacheParameterGroupName",
    cache_security_group_names=["cacheSecurityGroupNames"],
    cache_subnet_group_name="cacheSubnetGroupName",
    cluster_mode="clusterMode",
    data_tiering_enabled=False,
    engine="engine",
    engine_version="engineVersion",
    global_replication_group_id="globalReplicationGroupId",
    ip_discovery="ipDiscovery",
    kms_key_id="kmsKeyId",
    log_delivery_configurations=[elasticache.CfnReplicationGroup.LogDeliveryConfigurationRequestProperty(
        destination_details=elasticache.CfnReplicationGroup.DestinationDetailsProperty(
            cloud_watch_logs_details=elasticache.CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty(
                log_group="logGroup"
            ),
            kinesis_firehose_details=elasticache.CfnReplicationGroup.KinesisFirehoseDestinationDetailsProperty(
                delivery_stream="deliveryStream"
            )
        ),
        destination_type="destinationType",
        log_format="logFormat",
        log_type="logType"
    )],
    multi_az_enabled=False,
    network_type="networkType",
    node_group_configuration=[elasticache.CfnReplicationGroup.NodeGroupConfigurationProperty(
        node_group_id="nodeGroupId",
        primary_availability_zone="primaryAvailabilityZone",
        replica_availability_zones=["replicaAvailabilityZones"],
        replica_count=123,
        slots="slots"
    )],
    notification_topic_arn="notificationTopicArn",
    num_cache_clusters=123,
    num_node_groups=123,
    port=123,
    preferred_cache_cluster_aZs=["preferredCacheClusterAZs"],
    preferred_maintenance_window="preferredMaintenanceWindow",
    primary_cluster_id="primaryClusterId",
    replicas_per_node_group=123,
    replication_group_id="replicationGroupId",
    security_group_ids=["securityGroupIds"],
    snapshot_arns=["snapshotArns"],
    snapshot_name="snapshotName",
    snapshot_retention_limit=123,
    snapshotting_cluster_id="snapshottingClusterId",
    snapshot_window="snapshotWindow",
    tags=[CfnTag(
        key="key",
        value="value"
    )],
    transit_encryption_enabled=False,
    transit_encryption_mode="transitEncryptionMode",
    user_group_ids=["userGroupIds"]
)

Parameters:

scope (Construct) – Scope in which this resource is defined.
id (str) – Construct identifier for this resource (unique in its scope).
replication_group_description (str) – A user-created description for the replication group.
at_rest_encryption_enabled (Union[bool, IResolvable, None]) – A flag that enables encryption at rest when set to true . You cannot modify the value of AtRestEncryptionEnabled after the replication group is created. To enable encryption at rest on a replication group you must set AtRestEncryptionEnabled to true when you create the replication group. Required: Only available when creating a replication group in an Amazon VPC using Redis OSS version 3.2.6 or 4.x onward. Default: false
auth_token (Optional[str]) – Reserved parameter. The password used to access a password protected server. AuthToken can be specified only on replication groups where TransitEncryptionEnabled is true . For more information, see Authenticating Users with the Redis OSS AUTH Command . .. epigraph:: For HIPAA compliance, you must specify TransitEncryptionEnabled as true , an AuthToken , and a CacheSubnetGroup . Password constraints: - Must be only printable ASCII characters. - Must be at least 16 characters and no more than 128 characters in length. - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ). For more information, see AUTH password at http://redis.io/commands/AUTH. .. epigraph:: If ADDING the AuthToken, update requires Replacement .
automatic_failover_enabled (Union[bool, IResolvable, None]) – Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. AutomaticFailoverEnabled must be enabled for Redis OSS (cluster mode enabled) replication groups. Default: false
auto_minor_version_upgrade (Union[bool, IResolvable, None]) – If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
cache_node_type (Optional[str]) – The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. - General purpose: - Current generation: M6g node types: cache.m6g.large , cache.m6g.xlarge , cache.m6g.2xlarge , cache.m6g.4xlarge , cache.m6g.12xlarge , cache.m6g.24xlarge M5 node types: cache.m5.large , cache.m5.xlarge , cache.m5.2xlarge , cache.m5.4xlarge , cache.m5.12xlarge , cache.m5.24xlarge M4 node types: cache.m4.large , cache.m4.xlarge , cache.m4.2xlarge , cache.m4.4xlarge , cache.m4.10xlarge T4g node types: cache.t4g.micro , cache.t4g.small , cache.t4g.medium T3 node types: cache.t3.micro , cache.t3.small , cache.t3.medium T2 node types: cache.t2.micro , cache.t2.small , cache.t2.medium - Previous generation: (not recommended) T1 node types: cache.t1.micro M1 node types: cache.m1.small , cache.m1.medium , cache.m1.large , cache.m1.xlarge M3 node types: cache.m3.medium , cache.m3.large , cache.m3.xlarge , cache.m3.2xlarge - Compute optimized: - Previous generation: (not recommended) C1 node types: cache.c1.xlarge - Memory optimized: - Current generation: R6gd node types: cache.r6gd.xlarge , cache.r6gd.2xlarge , cache.r6gd.4xlarge , cache.r6gd.8xlarge , cache.r6gd.12xlarge , cache.r6gd.16xlarge .. epigraph:: The r6gd family is available in the following regions: us-east-2 , us-east-1 , us-west-2 , us-west-1 , eu-west-1 , eu-central-1 , ap-northeast-1 , ap-southeast-1 , ap-southeast-2 . R6g node types: cache.r6g.large , cache.r6g.xlarge , cache.r6g.2xlarge , cache.r6g.4xlarge , cache.r6g.12xlarge , cache.r6g.24xlarge R5 node types: cache.r5.large , cache.r5.xlarge , cache.r5.2xlarge , cache.r5.4xlarge , cache.r5.12xlarge , cache.r5.24xlarge R4 node types: cache.r4.large , cache.r4.xlarge , cache.r4.2xlarge , cache.r4.4xlarge , cache.r4.8xlarge , cache.r4.16xlarge - Previous generation: (not recommended) M2 node types: cache.m2.xlarge , cache.m2.2xlarge , cache.m2.4xlarge R3 node types: cache.r3.large , cache.r3.xlarge , cache.r3.2xlarge , cache.r3.4xlarge , cache.r3.8xlarge For region availability, see Supported Node Types by Amazon Region
cache_parameter_group_name (Optional[str]) – The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used. If you are running Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name. - To create a Redis OSS (cluster mode disabled) replication group, use CacheParameterGroupName=default.redis3.2 . - To create a Redis OSS (cluster mode enabled) replication group, use CacheParameterGroupName=default.redis3.2.cluster.on .
cache_security_group_names (Optional[Sequence[str]]) – A list of cache security group names to associate with this replication group.
cache_subnet_group_name (Optional[str]) – The name of the cache subnet group to be used for the replication group. .. epigraph:: If you’re going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see AWS::ElastiCache::SubnetGroup .
cluster_mode (Optional[str]) – Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see Modify cluster mode .
data_tiering_enabled (Union[bool, IResolvable, None]) – Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see Data tiering .
engine (Optional[str]) – The name of the cache engine to be used for the clusters in this replication group. The value must be set to Redis .
engine_version (Optional[str]) – The version number of the cache engine to be used for the clusters in this replication group. To view the supported cache engine versions, use the DescribeCacheEngineVersions operation. Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version ) in the ElastiCache User Guide , but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
global_replication_group_id (Optional[str]) – The name of the Global datastore.
ip_discovery (Optional[str]) – The network type you choose when creating a replication group, either ipv4 | ipv6 . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system .
kms_key_id (Optional[str]) – The ID of the KMS key used to encrypt the disk on the cluster.
log_delivery_configurations (Union[IResolvable, Sequence[Union[IResolvable, LogDeliveryConfigurationRequestProperty, Dict[str, Any]]], None]) – Specifies the destination, format and type of the logs.
multi_az_enabled (Union[bool, IResolvable, None]) – A flag indicating if you have Multi-AZ enabled to enhance fault tolerance. For more information, see Minimizing Downtime: Multi-AZ .
network_type (Optional[str]) –
Must be either ipv4 | ipv6 | dual_stack . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the Nitro system .
node_group_configuration (Union[IResolvable, Sequence[Union[IResolvable, NodeGroupConfigurationProperty, Dict[str, Any]]], None]) –
NodeGroupConfiguration is a property of the AWS::ElastiCache::ReplicationGroup resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group. If you set UseOnlineResharding to true , you can update NodeGroupConfiguration without interruption. When UseOnlineResharding is set to false , or is not specified, updating NodeGroupConfiguration results in replacement .
notification_topic_arn (Optional[str]) – The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent. .. epigraph:: The Amazon SNS topic owner must be the same as the cluster owner.
num_cache_clusters (Union[int, float, None]) – The number of clusters this replication group initially has. This parameter is not used if there is more than one node group (shard). You should use ReplicasPerNodeGroup instead. If AutomaticFailoverEnabled is true , the value of this parameter must be at least 2. If AutomaticFailoverEnabled is false you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6. The maximum permitted value for NumCacheClusters is 6 (1 primary plus 5 replicas).
num_node_groups (Union[int, float, None]) –
An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group. For Redis OSS (cluster mode disabled) either omit this parameter or set it to 1. If you set UseOnlineResharding to true , you can update NumNodeGroups without interruption. When UseOnlineResharding is set to false , or is not specified, updating NumNodeGroups results in replacement . Default: 1
port (Union[int, float, None]) – The port number on which each member of the replication group accepts connections.
preferred_cache_cluster_a_zs (Optional[Sequence[str]]) – A list of EC2 Availability Zones in which the replication group’s clusters are created. The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list. This parameter is not used if there is more than one node group (shard). You should use NodeGroupConfiguration instead. .. epigraph:: If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group. The number of Availability Zones listed must equal the value of NumCacheClusters . Default: system chosen Availability Zones.
preferred_maintenance_window (Optional[str]) – Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ddd are: - sun - mon - tue - wed - thu - fri - sat Example: sun:23:00-mon:01:30
primary_cluster_id (Optional[str]) – The identifier of the cluster that serves as the primary for this replication group. This cluster must already exist and have a status of available . This parameter is not required if NumCacheClusters , NumNodeGroups , or ReplicasPerNodeGroup is specified.
replicas_per_node_group (Union[int, float, None]) – An optional parameter that specifies the number of replica nodes in each node group (shard). Valid values are 0 to 5.
replication_group_id (Optional[str]) – The replication group identifier. This parameter is stored as a lowercase string. Constraints: - A name must contain from 1 to 40 alphanumeric characters or hyphens. - The first character must be a letter. - A name cannot end with a hyphen or contain two consecutive hyphens.
security_group_ids (Optional[Sequence[str]]) – One or more Amazon VPC security groups associated with this replication group. Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).
snapshot_arns (Optional[Sequence[str]]) – A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter NumNodeGroups or the number of node groups configured by NodeGroupConfiguration regardless of the number of ARNs specified here. Example of an Amazon S3 ARN: arn:aws:s3:::my_bucket/snapshot1.rdb
snapshot_name (Optional[str]) – The name of a snapshot from which to restore data into the new replication group. The snapshot status changes to restoring while the new replication group is being created.
snapshot_retention_limit (Union[int, float, None]) – The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set SnapshotRetentionLimit to 5, a snapshot that was taken today is retained for 5 days before being deleted. Default: 0 (i.e., automatic backups are disabled for this cluster).
snapshotting_cluster_id (Optional[str]) – The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Redis OSS (cluster mode enabled) replication groups.
snapshot_window (Optional[str]) – The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard). Example: 05:00-09:00 If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.
tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – A list of tags to be added to this resource. Tags are comma-separated key,value pairs (e.g. Key= myKey , Value= myKeyValue . You can include multiple tags as shown following: Key= myKey , Value= myKeyValue Key= mySecondKey , Value= mySecondKeyValue . Tags on replication groups will be replicated to all nodes.
transit_encryption_enabled (Union[bool, IResolvable, None]) – A flag that enables in-transit encryption when set to true . You cannot modify the value of TransitEncryptionEnabled after the cluster is created. To enable in-transit encryption on a cluster you must set TransitEncryptionEnabled to true when you create a cluster. This parameter is valid only if the Engine parameter is redis , the EngineVersion parameter is 3.2.6 or 4.x onward, and the cluster is being created in an Amazon VPC. If you enable in-transit encryption, you must also specify a value for CacheSubnetGroup . Required: Only available when creating a replication group in an Amazon VPC using Redis OSS version 3.2.6 or 4.x onward. Default: false .. epigraph:: For HIPAA compliance, you must specify TransitEncryptionEnabled as true , an AuthToken , and a CacheSubnetGroup .
transit_encryption_mode (Optional[str]) – A setting that allows you to migrate your clients to use in-transit encryption, with no downtime. When setting TransitEncryptionEnabled to true , you can set your TransitEncryptionMode to preferred in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis OSS clients to use encrypted connections you can modify the value to required to allow encrypted connections only. Setting TransitEncryptionMode to required is a two-step process that requires you to first set the TransitEncryptionMode to preferred , after that you can set TransitEncryptionMode to required . This process will not trigger the replacement of the replication group.
user_group_ids (Optional[Sequence[str]]) – The ID of user group to associate with the replication group.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_dependency(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_depends_on(target)

(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

Parameters:

target (CfnResource) –

Deprecated:

use addDependency

Stability:

deprecated

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
  "GlobalSecondaryIndexes": [
    {
      "Projection": {
        "NonKeyAttributes": [ "myattribute" ]
        ...
      }
      ...
    },
    {
      "ProjectionType": "INCLUDE"
      ...
    },
  ]
  ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.

See:

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type:

None

get_att(attribute_name, type_hint=None)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:

attribute_name (str) – The name of the attribute.
type_hint (Optional[ResolutionTypeHint]) –

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:: inspector (TreeInspector) – tree inspector to collect and process attributes.
Return type:: None

obtain_dependencies()

Retrieves an array of resources this resource depends on.

This assembles dependencies on resources across stacks (including nested stacks) automatically.

Return type:: List[Union[Stack, CfnResource]]

obtain_resource_dependencies()

Get a shallow copy of dependencies between this resource and other resources in the same stack.

Return type:: List[CfnResource]

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

remove_dependency(target)

Indicates that this resource no longer depends on another resource.

This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

replace_dependency(target, new_target)

Replaces one dependency with another.

Parameters:

target (CfnResource) – The dependency to replace.
new_target (CfnResource) – The new dependency to add.

Return type:

None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::ElastiCache::ReplicationGroup'

at_rest_encryption_enabled: A flag that enables encryption at rest when set to true .

attr_configuration_end_point_address

The DNS hostname of the cache node.

Redis OSS (cluster mode disabled) replication groups don’t have this attribute. Therefore, Fn::GetAtt returns a value for this attribute only if the replication group is clustered. Otherwise, Fn::GetAtt fails. For Redis OSS (cluster mode disabled) replication groups, use the PrimaryEndpoint or ReadEndpoint attributes.

CloudformationAttribute:: ConfigurationEndPoint.Address

attr_configuration_end_point_port

The port number that the cache engine is listening on.

CloudformationAttribute:: ConfigurationEndPoint.Port

attr_primary_end_point_address

The DNS address of the primary read-write cache node.

CloudformationAttribute:: PrimaryEndPoint.Address

attr_primary_end_point_port

The number of the port that the primary read-write cache engine is listening on.

CloudformationAttribute:: PrimaryEndPoint.Port

attr_read_end_point_addresses

A string with a list of endpoints for the primary and read-only replicas.

The order of the addresses maps to the order of the ports from the ReadEndPoint.Ports attribute.

CloudformationAttribute:: ReadEndPoint.Addresses

attr_read_end_point_addresses_list

A string with a list of endpoints for the read-only replicas.

The order of the addresses maps to the order of the ports from the ReadEndPoint.Ports attribute.

CloudformationAttribute:: ReadEndPoint.Addresses.List

attr_read_end_point_ports

A string with a list of ports for the read-only replicas.

The order of the ports maps to the order of the addresses from the ReadEndPoint.Addresses attribute.

CloudformationAttribute:: ReadEndPoint.Ports

attr_read_end_point_ports_list

A string with a list of ports for the read-only replicas.

The order of the ports maps to the order of the addresses from the ReadEndPoint.Addresses attribute.

CloudformationAttribute:: ReadEndPoint.Ports.List

attr_reader_end_point_address

The address of the reader endpoint.

CloudformationAttribute:: ReaderEndPoint.Address

attr_reader_end_point_port

The port used by the reader endpoint.

CloudformationAttribute:: ReaderEndPoint.Port

auth_token: Reserved parameter. The password used to access a password protected server.

auto_minor_version_upgrade: If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.

automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.

cache_node_type: The compute and memory capacity of the nodes in the node group (shard).

cache_parameter_group_name: The name of the parameter group to associate with this replication group.

cache_security_group_names: A list of cache security group names to associate with this replication group.

cache_subnet_group_name: The name of the cache subnet group to be used for the replication group.

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

cluster_mode: Enabled or Disabled.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

data_tiering_enabled: Enables data tiering.

engine: The name of the cache engine to be used for the clusters in this replication group.

engine_version: The version number of the cache engine to be used for the clusters in this replication group.

global_replication_group_id: The name of the Global datastore.

ip_discovery: The network type you choose when creating a replication group, either ipv4 | ipv6 .

kms_key_id: The ID of the KMS key used to encrypt the disk on the cluster.

log_delivery_configurations: Specifies the destination, format and type of the logs.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

multi_az_enabled: A flag indicating if you have Multi-AZ enabled to enhance fault tolerance.

network_type: Must be either ipv4 | ipv6 | dual_stack .

node: The tree node.

node_group_configuration: NodeGroupConfiguration is a property of the AWS::ElastiCache::ReplicationGroup resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group.

notification_topic_arn: The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent.

num_cache_clusters: The number of clusters this replication group initially has.

num_node_groups: An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group.

port: The port number on which each member of the replication group accepts connections.

preferred_cache_cluster_a_zs: A list of EC2 Availability Zones in which the replication group’s clusters are created.

preferred_maintenance_window: Specifies the weekly time range during which maintenance on the cluster is performed.

primary_cluster_id: The identifier of the cluster that serves as the primary for this replication group.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

replicas_per_node_group: An optional parameter that specifies the number of replica nodes in each node group (shard).

replication_group_description: A user-created description for the replication group.

replication_group_id

The replication group identifier.

This parameter is stored as a lowercase string.

security_group_ids: One or more Amazon VPC security groups associated with this replication group.

snapshot_arns: A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3.

snapshot_name: The name of a snapshot from which to restore data into the new replication group.

snapshot_retention_limit: The number of days for which ElastiCache retains automatic snapshots before deleting them.

snapshot_window: The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard).

snapshotting_cluster_id: The cluster ID that is used as the daily snapshot source for the replication group.

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags: Tag Manager which manages the tags for this resource.

tags_raw: A list of tags to be added to this resource.

transit_encryption_enabled: A flag that enables in-transit encryption when set to true .

transit_encryption_mode: A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.

user_group_ids: The ID of user group to associate with the replication group.

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(x)

Check whether the given object is a CfnResource.

Parameters:

x (Any) –

Return type:

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

CloudWatchLogsDestinationDetailsProperty

class CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty(*, log_group)

Bases: object

The configuration details of the CloudWatch Logs destination.

Note that this field is marked as required but only if CloudWatch Logs was chosen as the destination.

Parameters:: log_group (str) – The name of the CloudWatch Logs log group.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-cloudwatchlogsdestinationdetails.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

cloud_watch_logs_destination_details_property = elasticache.CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty(
    log_group="logGroup"
)

Attributes

log_group

The name of the CloudWatch Logs log group.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-cloudwatchlogsdestinationdetails.html#cfn-elasticache-replicationgroup-cloudwatchlogsdestinationdetails-loggroup

DestinationDetailsProperty

class CfnReplicationGroup.DestinationDetailsProperty(*, cloud_watch_logs_details=None, kinesis_firehose_details=None)

Bases: object

Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.

Parameters:

cloud_watch_logs_details (Union[IResolvable, CloudWatchLogsDestinationDetailsProperty, Dict[str, Any], None]) – The configuration details of the CloudWatch Logs destination. Note that this field is marked as required but only if CloudWatch Logs was chosen as the destination.
kinesis_firehose_details (Union[IResolvable, KinesisFirehoseDestinationDetailsProperty, Dict[str, Any], None]) – The configuration details of the Kinesis Data Firehose destination. Note that this field is marked as required but only if Kinesis Data Firehose was chosen as the destination.

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-destinationdetails.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

destination_details_property = elasticache.CfnReplicationGroup.DestinationDetailsProperty(
    cloud_watch_logs_details=elasticache.CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty(
        log_group="logGroup"
    ),
    kinesis_firehose_details=elasticache.CfnReplicationGroup.KinesisFirehoseDestinationDetailsProperty(
        delivery_stream="deliveryStream"
    )
)

Attributes

cloud_watch_logs_details

The configuration details of the CloudWatch Logs destination.

Note that this field is marked as required but only if CloudWatch Logs was chosen as the destination.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-destinationdetails.html#cfn-elasticache-replicationgroup-destinationdetails-cloudwatchlogsdetails

kinesis_firehose_details

The configuration details of the Kinesis Data Firehose destination.

Note that this field is marked as required but only if Kinesis Data Firehose was chosen as the destination.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-destinationdetails.html#cfn-elasticache-replicationgroup-destinationdetails-kinesisfirehosedetails

KinesisFirehoseDestinationDetailsProperty

class CfnReplicationGroup.KinesisFirehoseDestinationDetailsProperty(*, delivery_stream)

Bases: object

The configuration details of the Kinesis Data Firehose destination.

Note that this field is marked as required but only if Kinesis Data Firehose was chosen as the destination.

Parameters:: delivery_stream (str) – The name of the Kinesis Data Firehose delivery stream.
See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-kinesisfirehosedestinationdetails.html
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

kinesis_firehose_destination_details_property = elasticache.CfnReplicationGroup.KinesisFirehoseDestinationDetailsProperty(
    delivery_stream="deliveryStream"
)

Attributes

delivery_stream

The name of the Kinesis Data Firehose delivery stream.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-kinesisfirehosedestinationdetails.html#cfn-elasticache-replicationgroup-kinesisfirehosedestinationdetails-deliverystream

LogDeliveryConfigurationRequestProperty

class CfnReplicationGroup.LogDeliveryConfigurationRequestProperty(*, destination_details, destination_type, log_format, log_type)

Bases: object

Specifies the destination, format and type of the logs.

Parameters:

destination_details (Union[IResolvable, DestinationDetailsProperty, Dict[str, Any]]) – Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
destination_type (str) – Specify either CloudWatch Logs or Kinesis Data Firehose as the destination type. Valid values are either cloudwatch-logs or kinesis-firehose .
log_format (str) – Valid values are either json or text .
log_type (str) – Valid value is either slow-log , which refers to slow-log or engine-log .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-logdeliveryconfigurationrequest.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

log_delivery_configuration_request_property = elasticache.CfnReplicationGroup.LogDeliveryConfigurationRequestProperty(
    destination_details=elasticache.CfnReplicationGroup.DestinationDetailsProperty(
        cloud_watch_logs_details=elasticache.CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty(
            log_group="logGroup"
        ),
        kinesis_firehose_details=elasticache.CfnReplicationGroup.KinesisFirehoseDestinationDetailsProperty(
            delivery_stream="deliveryStream"
        )
    ),
    destination_type="destinationType",
    log_format="logFormat",
    log_type="logType"
)

Attributes

destination_details

Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-logdeliveryconfigurationrequest.html#cfn-elasticache-replicationgroup-logdeliveryconfigurationrequest-destinationdetails

destination_type

Specify either CloudWatch Logs or Kinesis Data Firehose as the destination type.

Valid values are either cloudwatch-logs or kinesis-firehose .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-logdeliveryconfigurationrequest.html#cfn-elasticache-replicationgroup-logdeliveryconfigurationrequest-destinationtype

log_format

Valid values are either json or text .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-logdeliveryconfigurationrequest.html#cfn-elasticache-replicationgroup-logdeliveryconfigurationrequest-logformat

log_type

//redis.io/commands/slowlog>`_ or engine-log .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-logdeliveryconfigurationrequest.html#cfn-elasticache-replicationgroup-logdeliveryconfigurationrequest-logtype
Type:: Valid value is either slow-log , which refers to `slow-log <https
Type:: //docs.aws.amazon.com/https

NodeGroupConfigurationProperty

class CfnReplicationGroup.NodeGroupConfigurationProperty(*, node_group_id=None, primary_availability_zone=None, replica_availability_zones=None, replica_count=None, slots=None)

Bases: object

NodeGroupConfiguration is a property of the AWS::ElastiCache::ReplicationGroup resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group.

Parameters:

node_group_id (Optional[str]) – Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
primary_availability_zone (Optional[str]) – The Availability Zone where the primary node of this node group (shard) is launched.
replica_availability_zones (Optional[Sequence[str]]) – A list of Availability Zones to be used for the read replicas. The number of Availability Zones in this list must match the value of ReplicaCount or ReplicasPerNodeGroup if not specified.
replica_count (Union[int, float, None]) – The number of read replica nodes in this node group (shard).
slots (Optional[str]) – A string of comma-separated values where the first set of values are the slot numbers (zero based), and the second set of values are the keyspaces for each slot. The following example specifies three slots (numbered 0, 1, and 2): 0,1,2,0-4999,5000-9999,10000-16,383 . If you don’t specify a value, ElastiCache allocates keys equally among each slot. When you use an UseOnlineResharding update policy to update the number of node groups without interruption, ElastiCache evenly distributes the keyspaces between the specified number of slots. This cannot be updated later. Therefore, after updating the number of node groups in this way, you should remove the value specified for the Slots property of each NodeGroupConfiguration from the stack template, as it no longer reflects the actual values in each node group. For more information, see UseOnlineResharding Policy .

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_elasticache as elasticache

node_group_configuration_property = elasticache.CfnReplicationGroup.NodeGroupConfigurationProperty(
    node_group_id="nodeGroupId",
    primary_availability_zone="primaryAvailabilityZone",
    replica_availability_zones=["replicaAvailabilityZones"],
    replica_count=123,
    slots="slots"
)

Attributes

node_group_id

Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-nodegroupid

primary_availability_zone

The Availability Zone where the primary node of this node group (shard) is launched.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-primaryavailabilityzone

replica_availability_zones

A list of Availability Zones to be used for the read replicas.

The number of Availability Zones in this list must match the value of ReplicaCount or ReplicasPerNodeGroup if not specified.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-replicaavailabilityzones

replica_count

The number of read replica nodes in this node group (shard).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-replicacount

slots

A string of comma-separated values where the first set of values are the slot numbers (zero based), and the second set of values are the keyspaces for each slot.

The following example specifies three slots (numbered 0, 1, and 2): 0,1,2,0-4999,5000-9999,10000-16,383 .

If you don’t specify a value, ElastiCache allocates keys equally among each slot.

When you use an UseOnlineResharding update policy to update the number of node groups without interruption, ElastiCache evenly distributes the keyspaces between the specified number of slots. This cannot be updated later. Therefore, after updating the number of node groups in this way, you should remove the value specified for the Slots property of each NodeGroupConfiguration from the stack template, as it no longer reflects the actual values in each node group. For more information, see UseOnlineResharding Policy .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-slots