CfnScheduledAction
- class aws_cdk.aws_autoscaling.CfnScheduledAction(scope, id, *, auto_scaling_group_name, desired_capacity=None, end_time=None, max_size=None, min_size=None, recurrence=None, start_time=None, time_zone=None)
Bases:
CfnResource
The
AWS::AutoScaling::ScheduledAction
resource specifies an Amazon EC2 Auto Scaling scheduled action so that the Auto Scaling group can change the number of instances available for your application in response to predictable load changes.When you update a stack with an Auto Scaling group and scheduled action, CloudFormation always sets the min size, max size, and desired capacity properties of your group to the values that are defined in the
AWS::AutoScaling::AutoScalingGroup
section of your template. However, you might not want CloudFormation to do that when you have a scheduled action in effect. You can use an UpdatePolicy attribute to prevent CloudFormation from changing the min size, max size, or desired capacity property values during a stack update unless you modified the individual values in your template. If you have rolling updates enabled, before you can update the Auto Scaling group, you must suspend scheduled actions by specifying an UpdatePolicy attribute for the Auto Scaling group. You can find a sample update policy for rolling updates in Configure Amazon EC2 Auto Scaling resources .For more information, see Scheduled scaling and Suspending and resuming scaling processes in the Amazon EC2 Auto Scaling User Guide .
- See:
- CloudformationResource:
AWS::AutoScaling::ScheduledAction
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. from aws_cdk import aws_autoscaling as autoscaling cfn_scheduled_action = autoscaling.CfnScheduledAction(self, "MyCfnScheduledAction", auto_scaling_group_name="autoScalingGroupName", # the properties below are optional desired_capacity=123, end_time="endTime", max_size=123, min_size=123, recurrence="recurrence", start_time="startTime", time_zone="timeZone" )
- Parameters:
scope (
Construct
) – Scope in which this resource is defined.id (
str
) – Construct identifier for this resource (unique in its scope).auto_scaling_group_name (
str
) – The name of the Auto Scaling group.desired_capacity (
Union
[int
,float
,None
]) – The desired capacity is the initial capacity of the Auto Scaling group after the scheduled action runs and the capacity it attempts to maintain. It can scale beyond this capacity if you add more scaling conditions. .. epigraph:: You must specify at least one of the following properties:MaxSize
,MinSize
, orDesiredCapacity
.end_time (
Optional
[str
]) – The date and time for the recurring schedule to end, in UTC. For example,"2021-06-01T00:00:00Z"
.max_size (
Union
[int
,float
,None
]) – The maximum size of the Auto Scaling group.min_size (
Union
[int
,float
,None
]) – The minimum size of the Auto Scaling group.recurrence (
Optional
[str
]) – The recurring schedule for this action. This format consists of five fields separated by white spaces: [Minute] [Hour] [Day_of_Month] [Month_of_Year] [Day_of_Week]. The value must be in quotes (for example,"30 0 1 1,6,12 *"
). For more information about this format, see Crontab . WhenStartTime
andEndTime
are specified withRecurrence
, they form the boundaries of when the recurring action starts and stops. Cron expressions use Universal Coordinated Time (UTC) by default.start_time (
Optional
[str
]) – The date and time for this action to start, in YYYY-MM-DDThh:mm:ssZ format in UTC/GMT only and in quotes (for example,"2021-06-01T00:00:00Z"
). If you specifyRecurrence
andStartTime
, Amazon EC2 Auto Scaling performs the action at this time, and then performs the action based on the specified recurrence.time_zone (
Optional
[str
]) – Specifies the time zone for a cron expression. If a time zone is not provided, UTC is used by default. Valid values are the canonical names of the IANA time zones, derived from the IANA Time Zone Database (such asEtc/GMT+9
orPacific/Tahiti
). For more information, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones .
Methods
- add_deletion_override(path)
Syntactic sugar for
addOverride(path, undefined)
.- Parameters:
path (
str
) – The path of the value to delete.- Return type:
None
- add_dependency(target)
Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
- Parameters:
target (
CfnResource
) –- Return type:
None
- add_depends_on(target)
(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
- Parameters:
target (
CfnResource
) –- Deprecated:
use addDependency
- Stability:
deprecated
- Return type:
None
- add_metadata(key, value)
Add a value to the CloudFormation Resource Metadata.
- Parameters:
key (
str
) –value (
Any
) –
- See:
- Return type:
None
https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.
- add_override(path, value)
Adds an override to the synthesized CloudFormation resource.
To add a property override, either use
addPropertyOverride
or prefixpath
with “Properties.” (i.e.Properties.TopicName
).If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.
To include a literal
.
in the property name, prefix with a\
. In most programming languages you will need to write this as"\\."
because the\
itself will need to be escaped.For example:
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"]) cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")
would add the overrides Example:
"Properties": { "GlobalSecondaryIndexes": [ { "Projection": { "NonKeyAttributes": [ "myattribute" ] ... } ... }, { "ProjectionType": "INCLUDE" ... }, ] ... }
The
value
argument toaddOverride
will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.- Parameters:
path (
str
) –The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.
value (
Any
) –The value. Could be primitive or complex.
- Return type:
None
- add_property_deletion_override(property_path)
Adds an override that deletes the value of a property from the resource definition.
- Parameters:
property_path (
str
) – The path to the property.- Return type:
None
- add_property_override(property_path, value)
Adds an override to a resource property.
Syntactic sugar for
addOverride("Properties.<...>", value)
.- Parameters:
property_path (
str
) – The path of the property.value (
Any
) – The value.
- Return type:
None
- apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)
Sets the deletion policy of the resource based on the removal policy specified.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.
The resource can be deleted (
RemovalPolicy.DESTROY
), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN
). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT
). A list of resources that support this policy can be found in the following link:- Parameters:
policy (
Optional
[RemovalPolicy
]) –apply_to_update_replace_policy (
Optional
[bool
]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: truedefault (
Optional
[RemovalPolicy
]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.
- See:
- Return type:
None
- get_att(attribute_name, type_hint=None)
Returns a token for an runtime attribute of this resource.
Ideally, use generated attribute accessors (e.g.
resource.arn
), but this can be used for future compatibility in case there is no generated attribute.- Parameters:
attribute_name (
str
) – The name of the attribute.type_hint (
Optional
[ResolutionTypeHint
]) –
- Return type:
- get_metadata(key)
Retrieve a value value from the CloudFormation Resource Metadata.
- Parameters:
key (
str
) –- See:
- Return type:
Any
https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.
- inspect(inspector)
Examines the CloudFormation resource and discloses attributes.
- Parameters:
inspector (
TreeInspector
) – tree inspector to collect and process attributes.- Return type:
None
- obtain_dependencies()
Retrieves an array of resources this resource depends on.
This assembles dependencies on resources across stacks (including nested stacks) automatically.
- Return type:
List
[Union
[Stack
,CfnResource
]]
- obtain_resource_dependencies()
Get a shallow copy of dependencies between this resource and other resources in the same stack.
- Return type:
List
[CfnResource
]
- override_logical_id(new_logical_id)
Overrides the auto-generated logical ID with a specific ID.
- Parameters:
new_logical_id (
str
) – The new logical ID to use for this stack element.- Return type:
None
- remove_dependency(target)
Indicates that this resource no longer depends on another resource.
This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.
- Parameters:
target (
CfnResource
) –- Return type:
None
- replace_dependency(target, new_target)
Replaces one dependency with another.
- Parameters:
target (
CfnResource
) – The dependency to replace.new_target (
CfnResource
) – The new dependency to add.
- Return type:
None
- to_string()
Returns a string representation of this construct.
- Return type:
str
- Returns:
a string representation of this resource
Attributes
- CFN_RESOURCE_TYPE_NAME = 'AWS::AutoScaling::ScheduledAction'
- attr_scheduled_action_name
Returns the name of a scheduled action.
- CloudformationAttribute:
ScheduledActionName
- auto_scaling_group_name
The name of the Auto Scaling group.
- cfn_options
Options for this resource, such as condition, update policy etc.
- cfn_resource_type
AWS resource type.
- creation_stack
return:
the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.
- desired_capacity
The desired capacity is the initial capacity of the Auto Scaling group after the scheduled action runs and the capacity it attempts to maintain.
- end_time
The date and time for the recurring schedule to end, in UTC.
- logical_id
The logical ID for this CloudFormation stack element.
The logical ID of the element is calculated from the path of the resource node in the construct tree.
To override this value, use
overrideLogicalId(newLogicalId)
.- Returns:
the logical ID as a stringified token. This value will only get resolved during synthesis.
- max_size
The maximum size of the Auto Scaling group.
- min_size
The minimum size of the Auto Scaling group.
- node
The tree node.
- recurrence
The recurring schedule for this action.
- ref
Return a string that will be resolved to a CloudFormation
{ Ref }
for this element.If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through
Lazy.any({ produce: resource.ref })
.
- stack
The stack in which this element is defined.
CfnElements must be defined within a stack scope (directly or indirectly).
- start_time
ssZ format in UTC/GMT only and in quotes (for example,
"2021-06-01T00:00:00Z"
).- Type:
The date and time for this action to start, in YYYY-MM-DDThh
- Type:
mm
- time_zone
Specifies the time zone for a cron expression.
Static Methods
- classmethod is_cfn_element(x)
Returns
true
if a construct is a stack element (i.e. part of the synthesized cloudformation template).Uses duck-typing instead of
instanceof
to allow stack elements from different versions of this library to be included in the same stack.- Parameters:
x (
Any
) –- Return type:
bool
- Returns:
The construct as a stack element or undefined if it is not a stack element.
- classmethod is_cfn_resource(x)
Check whether the given object is a CfnResource.
- Parameters:
x (
Any
) –- Return type:
bool
- classmethod is_construct(x)
Checks if
x
is a construct.Use this method instead of
instanceof
to properly detectConstruct
instances, even when the construct library is symlinked.Explanation: in JavaScript, multiple copies of the
constructs
library on disk are seen as independent, completely different libraries. As a consequence, the classConstruct
in each copy of theconstructs
library is seen as a different class, and an instance of one class will not test asinstanceof
the other class.npm install
will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of theconstructs
library can be accidentally installed, andinstanceof
will behave unpredictably. It is safest to avoid usinginstanceof
, and using this type-testing method instead.- Parameters:
x (
Any
) – Any object.- Return type:
bool
- Returns:
true if
x
is an object created from a class which extendsConstruct
.