Queue

class aws_cdk.aws_sqs.Queue(scope, id, *, content_based_deduplication=None, data_key_reuse=None, dead_letter_queue=None, deduplication_scope=None, delivery_delay=None, encryption=None, encryption_master_key=None, enforce_ssl=None, fifo=None, fifo_throughput_limit=None, max_message_size_bytes=None, queue_name=None, receive_message_wait_time=None, redrive_allow_policy=None, removal_policy=None, retention_period=None, visibility_timeout=None)

Bases: QueueBase

A new Amazon SQS queue.

ExampleMetadata:: infused

Example:

# source_queue: sqs.Queue
# target_queue: sqs.Queue


pipe_target = targets.SqsTarget(target_queue,
    input_transformation=pipes.InputTransformation.from_object({
        "SomeKey": pipes.DynamicInput.from_event_path("$.body")
    })
)

pipe = pipes.Pipe(self, "Pipe",
    source=SomeSource(source_queue),
    target=pipe_target
)

Parameters:

scope (Construct) –
id (str) –
content_based_deduplication (Optional[bool]) – Specifies whether to enable content-based deduplication. During the deduplication interval (5 minutes), Amazon SQS treats messages that are sent with identical content (excluding attributes) as duplicates and delivers only one copy of the message. If you don’t enable content-based deduplication and you want to deduplicate messages, provide an explicit deduplication ID in your SendMessage() call. (Only applies to FIFO queues.) Default: false
data_key_reuse (Optional[Duration]) – The length of time that Amazon SQS reuses a data key before calling KMS again. The value must be an integer between 60 (1 minute) and 86,400 (24 hours). The default is 300 (5 minutes). Default: Duration.minutes(5)
dead_letter_queue (Union[DeadLetterQueue, Dict[str, Any], None]) – Send messages to this queue if they were unsuccessfully dequeued a number of times. Default: no dead-letter queue
deduplication_scope (Optional[DeduplicationScope]) – For high throughput for FIFO queues, specifies whether message deduplication occurs at the message group or queue level. (Only applies to FIFO queues.) Default: DeduplicationScope.QUEUE
delivery_delay (Optional[Duration]) – The time in seconds that the delivery of all messages in the queue is delayed. You can specify an integer value of 0 to 900 (15 minutes). The default value is 0. Default: 0
encryption (Optional[QueueEncryption]) – Whether the contents of the queue are encrypted, and by what type of key. Be aware that encryption is not available in all regions, please see the docs for current availability details. Default: SQS_MANAGED (SSE-SQS) for newly created queues
encryption_master_key (Optional[IKey]) – External KMS key to use for queue encryption. Individual messages will be encrypted using data keys. The data keys in turn will be encrypted using this key, and reused for a maximum of dataKeyReuseSecs seconds. If the ‘encryptionMasterKey’ property is set, ‘encryption’ type will be implicitly set to “KMS”. Default: If encryption is set to KMS and not specified, a key will be created.
enforce_ssl (Optional[bool]) – Enforce encryption of data in transit. Default: false
fifo (Optional[bool]) – Whether this a first-in-first-out (FIFO) queue. Default: false, unless queueName ends in ‘.fifo’ or ‘contentBasedDeduplication’ is true.
fifo_throughput_limit (Optional[FifoThroughputLimit]) – For high throughput for FIFO queues, specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. (Only applies to FIFO queues.) Default: FifoThroughputLimit.PER_QUEUE
max_message_size_bytes (Union[int, float, None]) – The limit of how many bytes that a message can contain before Amazon SQS rejects it. You can specify an integer value from 1024 bytes (1 KiB) to 262144 bytes (256 KiB). The default value is 262144 (256 KiB). Default: 256KiB
queue_name (Optional[str]) – A name for the queue. If specified and this is a FIFO queue, must end in the string ‘.fifo’. Default: CloudFormation-generated name
receive_message_wait_time (Optional[Duration]) – Default wait time for ReceiveMessage calls. Does not wait if set to 0, otherwise waits this amount of seconds by default for messages to arrive. For more information, see Amazon SQS Long Poll. Default: 0
redrive_allow_policy (Union[RedriveAllowPolicy, Dict[str, Any], None]) – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues. Default: - All source queues can designate this queue as their dead-letter queue.
removal_policy (Optional[RemovalPolicy]) – Policy to apply when the queue is removed from the stack. Even though queues are technically stateful, their contents are transient and it is common to add and remove Queues while rearchitecting your application. The default is therefore DESTROY. Change it to RETAIN if the messages are so valuable that accidentally losing them would be unacceptable. Default: RemovalPolicy.DESTROY
retention_period (Optional[Duration]) – The number of seconds that Amazon SQS retains a message. You can specify an integer value from 60 seconds (1 minute) to 1209600 seconds (14 days). The default value is 345600 seconds (4 days). Default: Duration.days(4)
visibility_timeout (Optional[Duration]) – Timeout of processing a single message. After dequeuing, the processor has this much time to handle the message and delete it from the queue before it becomes visible again for dequeueing by another processor. Values must be from 0 to 43200 seconds (12 hours). If you don’t specify a value, AWS CloudFormation uses the default value of 30 seconds. Default: Duration.seconds(30)

Methods

add_to_resource_policy(statement)

Adds a statement to the IAM resource policy associated with this queue.

If this queue was created in this stack (new Queue), a queue policy will be automatically created upon the first call to addToPolicy. If the queue is imported (Queue.import), then this is a no-op.

Parameters:

statement (PolicyStatement) –

Return type:

AddToResourcePolicyResult

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

grant(grantee, *actions)

Grant the actions defined in queueActions to the identity Principal given on this SQS queue resource.

Parameters:

grantee (IGrantable) – Principal to grant right to.
actions (str) – The actions to grant.

Return type:

Grant

grant_consume_messages(grantee)

Grant permissions to consume messages from a queue.

This will grant the following permissions:

sqs:ChangeMessageVisibility
sqs:DeleteMessage
sqs:ReceiveMessage
sqs:GetQueueAttributes
sqs:GetQueueUrl

If encryption is used, permission to use the key to decrypt the contents of the queue will also be granted to the same principal.

This will grant the following KMS permissions:

kms:Decrypt

Parameters:: grantee (IGrantable) – Principal to grant consume rights to.
Return type:: Grant

grant_purge(grantee)

Grant an IAM principal permissions to purge all messages from the queue.

This will grant the following permissions:

sqs:PurgeQueue
sqs:GetQueueAttributes
sqs:GetQueueUrl

Parameters:: grantee (IGrantable) – Principal to grant send rights to.
Return type:: Grant

grant_send_messages(grantee)

Grant access to send messages to a queue to the given identity.

This will grant the following permissions:

sqs:SendMessage
sqs:GetQueueAttributes
sqs:GetQueueUrl

If encryption is used, permission to use the key to encrypt/decrypt the contents of the queue will also be granted to the same principal.

This will grant the following KMS permissions:

kms:Decrypt
kms:Encrypt
kms:ReEncrypt*
kms:GenerateDataKey*

Parameters:: grantee (IGrantable) – Principal to grant send rights to.
Return type:: Grant

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Return the given named metric for this Queue.

Parameters:

metric_name (str) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_age_of_oldest_message(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The approximate age of the oldest non-deleted message in the queue.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_delayed(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages in the queue that are delayed and not available for reading immediately.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_not_visible(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages that are in flight.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_visible(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages available for retrieval from the queue.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_empty_receives(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of ReceiveMessage API calls that did not return a message.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_deleted(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages deleted from the queue.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_received(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages returned by calls to the ReceiveMessage action.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_sent(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages added to a queue.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_sent_message_size(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The size of messages added to a queue.

Average over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

to_string()

Returns a string representation of this construct.

Return type:: str

Attributes

dead_letter_queue: If this queue is configured with a dead-letter queue, this is the dead-letter queue settings.

encryption_master_key: If this queue is encrypted, this is the KMS key.

encryption_type: Whether the contents of the queue are encrypted, and by what type of key.

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

fifo

Whether this queue is an Amazon SQS FIFO queue.

If false, this is a standard queue.

node: The tree node.

queue_arn: The ARN of this queue.

queue_name: The name of this queue.

queue_url: The URL of this queue.

stack: The stack in which this resource is defined.

Static Methods

classmethod from_queue_arn(scope, id, queue_arn)

Import an existing SQS queue provided an ARN.

Parameters:

scope (Construct) – The parent creating construct.
id (str) – The construct’s name.
queue_arn (str) – queue ARN (i.e. arn:aws:sqs:us-east-2:444455556666:queue1).

Return type:

IQueue

classmethod from_queue_attributes(scope, id, *, queue_arn, fifo=None, key_arn=None, queue_name=None, queue_url=None)

Import an existing queue.

Parameters:

scope (Construct) –
id (str) –
queue_arn (str) – The ARN of the queue.
fifo (Optional[bool]) – Whether this queue is an Amazon SQS FIFO queue. If false, this is a standard queue. In case of a FIFO queue which is imported from a token, this value has to be explicitly set to true. Default: - if fifo is not specified, the property will be determined based on the queue name (not possible for FIFO queues imported from a token)
key_arn (Optional[str]) – KMS encryption key, if this queue is server-side encrypted by a KMS key. Default: - None
queue_name (Optional[str]) – The name of the queue. Default: if queue name is not specified, the name will be derived from the queue ARN
queue_url (Optional[str]) – The URL of the queue. Default: - ‘https://sqs.//’

Return type:

IQueue

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool