CfnNetworkAclEntry

class aws_cdk.aws_ec2.CfnNetworkAclEntry(scope, id, *, network_acl_id, protocol, rule_action, rule_number, cidr_block=None, egress=None, icmp=None, ipv6_cidr_block=None, port_range=None)

Bases: CfnResource

A CloudFormation AWS::EC2::NetworkAclEntry.

Specifies an entry, known as a rule, in a network ACL with a rule number you specify. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules.

For information about the protocol value, see Protocol Numbers on the Internet Assigned Numbers Authority (IANA) website.

CloudformationResource

AWS::EC2::NetworkAclEntry

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

cfn_network_acl_entry = ec2.CfnNetworkAclEntry(self, "MyCfnNetworkAclEntry",
    network_acl_id="networkAclId",
    protocol=123,
    rule_action="ruleAction",
    rule_number=123,

    # the properties below are optional
    cidr_block="cidrBlock",
    egress=False,
    icmp=ec2.CfnNetworkAclEntry.IcmpProperty(
        code=123,
        type=123
    ),
    ipv6_cidr_block="ipv6CidrBlock",
    port_range=ec2.CfnNetworkAclEntry.PortRangeProperty(
        from=123,
        to=123
    )
)

Create a new AWS::EC2::NetworkAclEntry.

Parameters
  • scope (Construct) –

    • scope in which this resource is defined.

  • id (str) –

    • scoped id of the resource.

  • network_acl_id (str) – The ID of the ACL for the entry.

  • protocol (Union[int, float]) – The IP protocol that the rule applies to. You must specify -1 or a protocol number. You can specify -1 for all protocols. .. epigraph:: If you specify -1, all ports are opened and the PortRange property is ignored.

  • rule_action (str) – Whether to allow or deny traffic that matches the rule; valid values are “allow” or “deny”.

  • rule_number (Union[int, float]) – Rule number to assign to the entry, such as 100. ACL entries are processed in ascending order by rule number. Entries can’t use the same rule number unless one is an egress rule and the other is an ingress rule.

  • cidr_block (Optional[str]) – The IPv4 CIDR range to allow or deny, in CIDR notation (for example, 172.16.0.0/24). Requirement is conditional: You must specify the CidrBlock or Ipv6CidrBlock property.

  • egress (Union[bool, IResolvable, None]) – Whether this rule applies to egress traffic from the subnet ( true ) or ingress traffic to the subnet ( false ). By default, AWS CloudFormation specifies false .

  • icmp (Union[IcmpProperty, Dict[str, Any], IResolvable, None]) – The Internet Control Message Protocol (ICMP) code and type. Requirement is conditional: Required if specifying 1 (ICMP) for the protocol parameter.

  • ipv6_cidr_block (Optional[str]) – The IPv6 network range to allow or deny, in CIDR notation. Requirement is conditional: You must specify the CidrBlock or Ipv6CidrBlock property.

  • port_range (Union[PortRangeProperty, Dict[str, Any], IResolvable, None]) – The range of port numbers for the UDP/TCP protocol. Conditional required if specifying 6 (TCP) or 17 (UDP) for the protocol parameter.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters

path (str) – The path of the value to delete.

Return type

None

add_depends_on(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters

target (CfnResource) –

Return type

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters
  • key (str) –

  • value (Any) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type

None

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

# Example automatically generated from non-compiling source. May contain errors.
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
   "GlobalSecondaryIndexes": [
     {
       "Projection": {
         "NonKeyAttributes": [ "myattribute" ]
         ...
       }
       ...
     },
     {
       "ProjectionType": "INCLUDE"
       ...
     },
   ]
   ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters
  • path (str) –

    • The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.

  • value (Any) –

    • The value. Could be primitive or complex.

Return type

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters

property_path (str) – The path to the property.

Return type

None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters
  • property_path (str) – The path of the property.

  • value (Any) – The value.

Return type

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters
  • policy (Optional[RemovalPolicy]) –

  • apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true

  • default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type

None

get_att(attribute_name)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters

attribute_name (str) – The name of the attribute.

Return type

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters

key (str) –

See

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

Return type

Any

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters

inspector (TreeInspector) –

  • tree inspector to collect and process attributes.

Return type

None

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters

new_logical_id (str) – The new logical ID to use for this stack element.

Return type

None

to_string()

Returns a string representation of this construct.

Return type

str

Returns

a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::EC2::NetworkAclEntry'
attr_id

The ID of the network ACL entry.

CloudformationAttribute

Id

Return type

str

cfn_options

Options for this resource, such as condition, update policy etc.

Return type

ICfnResourceOptions

cfn_resource_type

AWS resource type.

Return type

str

cidr_block

You must specify the CidrBlock or Ipv6CidrBlock property.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-cidrblock

Type

The IPv4 CIDR range to allow or deny, in CIDR notation (for example, 172.16.0.0/24). Requirement is conditional

Return type

Optional[str]

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

Return type

List[str]

egress

Whether this rule applies to egress traffic from the subnet ( true ) or ingress traffic to the subnet ( false ).

By default, AWS CloudFormation specifies false .

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-egress

Return type

Union[bool, IResolvable, None]

icmp

The Internet Control Message Protocol (ICMP) code and type.

Requirement is conditional: Required if specifying 1 (ICMP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-icmp

Return type

Union[IcmpProperty, IResolvable, None]

ipv6_cidr_block

The IPv6 network range to allow or deny, in CIDR notation.

Requirement is conditional: You must specify the CidrBlock or Ipv6CidrBlock property.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-ipv6cidrblock

Return type

Optional[str]

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Return type

str

Returns

the logical ID as a stringified token. This value will only get resolved during synthesis.

network_acl_id

The ID of the ACL for the entry.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-networkaclid

Return type

str

node

The tree node.

Return type

Node

port_range

The range of port numbers for the UDP/TCP protocol.

Conditional required if specifying 6 (TCP) or 17 (UDP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-portrange

Return type

Union[PortRangeProperty, IResolvable, None]

protocol

The IP protocol that the rule applies to.

You must specify -1 or a protocol number. You can specify -1 for all protocols. .. epigraph:

If you specify -1, all ports are opened and the ``PortRange`` property is ignored.
Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-protocol

Return type

Union[int, float]

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

Return type

str

rule_action

Whether to allow or deny traffic that matches the rule;

valid values are “allow” or “deny”.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-ruleaction

Return type

str

rule_number

Rule number to assign to the entry, such as 100.

ACL entries are processed in ascending order by rule number. Entries can’t use the same rule number unless one is an egress rule and the other is an ingress rule.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-networkaclentry.html#cfn-ec2-networkaclentry-rulenumber

Return type

Union[int, float]

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

Return type

Stack

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters

x (Any) –

Return type

bool

Returns

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(construct)

Check whether the given construct is a CfnResource.

Parameters

construct (IConstruct) –

Return type

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters

x (Any) – Any object.

Return type

bool

Returns

true if x is an object created from a class which extends Construct.

IcmpProperty

class CfnNetworkAclEntry.IcmpProperty(*, code=None, type=None)

Bases: object

Describes the ICMP type and code.

Parameters
  • code (Union[int, float, None]) – The Internet Control Message Protocol (ICMP) code. You can use -1 to specify all ICMP codes for the given ICMP type. Requirement is conditional: Required if you specify 1 (ICMP) for the protocol parameter.

  • type (Union[int, float, None]) – The Internet Control Message Protocol (ICMP) type. You can use -1 to specify all ICMP types. Conditional requirement: Required if you specify 1 (ICMP) for the CreateNetworkAclEntry protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-icmp.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

icmp_property = ec2.CfnNetworkAclEntry.IcmpProperty(
    code=123,
    type=123
)

Attributes

code

The Internet Control Message Protocol (ICMP) code.

You can use -1 to specify all ICMP codes for the given ICMP type. Requirement is conditional: Required if you specify 1 (ICMP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-icmp.html#cfn-ec2-networkaclentry-icmp-code

Return type

Union[int, float, None]

type

The Internet Control Message Protocol (ICMP) type.

You can use -1 to specify all ICMP types. Conditional requirement: Required if you specify 1 (ICMP) for the CreateNetworkAclEntry protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-icmp.html#cfn-ec2-networkaclentry-icmp-type

Return type

Union[int, float, None]

PortRangeProperty

class CfnNetworkAclEntry.PortRangeProperty(*, from_=None, to=None)

Bases: object

Describes a range of ports.

Parameters
  • from – The first port in the range. Required if you specify 6 (TCP) or 17 (UDP) for the protocol parameter.

  • to (Union[int, float, None]) – The last port in the range. Required if you specify 6 (TCP) or 17 (UDP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-portrange.html

ExampleMetadata

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

port_range_property = ec2.CfnNetworkAclEntry.PortRangeProperty(
    from=123,
    to=123
)

Attributes

from_

The first port in the range.

Required if you specify 6 (TCP) or 17 (UDP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-portrange.html#cfn-ec2-networkaclentry-portrange-from

Return type

Union[int, float, None]

to

The last port in the range.

Required if you specify 6 (TCP) or 17 (UDP) for the protocol parameter.

Link

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-networkaclentry-portrange.html#cfn-ec2-networkaclentry-portrange-to

Return type

Union[int, float, None]