CfnSecurityGroup

class aws_cdk.aws_ec2.CfnSecurityGroup(scope, id, *, group_description, group_name=None, security_group_egress=None, security_group_ingress=None, tags=None, vpc_id=None)

Bases: CfnResource

Specifies a security group.

To create a security group, use the VpcId property to specify the VPC for which to create the security group.

If you do not specify an egress rule, we add egress rules that allow IPv4 and IPv6 traffic on all ports and protocols to any destination. We do not add these rules if you specify your own egress rules.

This type supports updates. For more information about updating stacks, see AWS CloudFormation Stacks Updates . .. epigraph:

To cross-reference two security groups in the ingress and egress rules of those security groups, use the `AWS::EC2::SecurityGroupEgress <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-security-group-egress.html>`_ and `AWS::EC2::SecurityGroupIngress <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-security-group-ingress.html>`_ resources to define your rules. Do not use the embedded ingress and egress rules in the ``AWS::EC2::SecurityGroup`` . Doing so creates a circular dependency, which AWS CloudFormation doesn't allow.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-securitygroup.html
CloudformationResource:: AWS::EC2::SecurityGroup
ExampleMetadata:: fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

cfn_security_group = ec2.CfnSecurityGroup(self, "MyCfnSecurityGroup",
    group_description="groupDescription",

    # the properties below are optional
    group_name="groupName",
    security_group_egress=[ec2.CfnSecurityGroup.EgressProperty(
        ip_protocol="ipProtocol",

        # the properties below are optional
        cidr_ip="cidrIp",
        cidr_ipv6="cidrIpv6",
        description="description",
        destination_prefix_list_id="destinationPrefixListId",
        destination_security_group_id="destinationSecurityGroupId",
        from_port=123,
        to_port=123
    )],
    security_group_ingress=[ec2.CfnSecurityGroup.IngressProperty(
        ip_protocol="ipProtocol",

        # the properties below are optional
        cidr_ip="cidrIp",
        cidr_ipv6="cidrIpv6",
        description="description",
        from_port=123,
        source_prefix_list_id="sourcePrefixListId",
        source_security_group_id="sourceSecurityGroupId",
        source_security_group_name="sourceSecurityGroupName",
        source_security_group_owner_id="sourceSecurityGroupOwnerId",
        to_port=123
    )],
    tags=[CfnTag(
        key="key",
        value="value"
    )],
    vpc_id="vpcId"
)

Parameters:

scope (Construct) – Scope in which this resource is defined.
id (str) – Construct identifier for this resource (unique in its scope).
group_description (str) – A description for the security group. Constraints: Up to 255 characters in length Valid characters: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
group_name (Optional[str]) – The name of the security group. Constraints: Up to 255 characters in length. Cannot start with sg- . Valid characters: a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*
security_group_egress (Union[IResolvable, Sequence[Union[IResolvable, EgressProperty, Dict[str, Any]]], None]) – The outbound rules associated with the security group. There is a short interruption during which you cannot connect to the security group.
security_group_ingress (Union[IResolvable, Sequence[Union[IResolvable, IngressProperty, Dict[str, Any]]], None]) – The inbound rules associated with the security group. There is a short interruption during which you cannot connect to the security group.
tags (Optional[Sequence[Union[CfnTag, Dict[str, Any]]]]) – Any tags assigned to the security group.
vpc_id (Optional[str]) – The ID of the VPC for the security group. If you do not specify a VPC, the default is to use the default VPC for the Region. If there’s no specified VPC and no default VPC, security group creation fails.

Methods

add_deletion_override(path)

Syntactic sugar for addOverride(path, undefined).

Parameters:: path (str) – The path of the value to delete.
Return type:: None

add_dependency(target)

Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

add_depends_on(target)

(deprecated) Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.

Parameters:

target (CfnResource) –

Deprecated:

use addDependency

Stability:

deprecated

Return type:

None

add_metadata(key, value)

Add a value to the CloudFormation Resource Metadata.

Parameters:

key (str) –
value (Any) –

See:

Return type:

None

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

add_override(path, value)

Adds an override to the synthesized CloudFormation resource.

To add a property override, either use addPropertyOverride or prefix path with “Properties.” (i.e. Properties.TopicName).

If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.

To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.

For example:

cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"])
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")

would add the overrides Example:

"Properties": {
  "GlobalSecondaryIndexes": [
    {
      "Projection": {
        "NonKeyAttributes": [ "myattribute" ]
        ...
      }
      ...
    },
    {
      "ProjectionType": "INCLUDE"
      ...
    },
  ]
  ...
}

The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.

Parameters:

path (str) –
- The path of the property, you can use dot notation to override values in complex types. Any intermediate keys will be created as needed.
value (Any) –
- The value. Could be primitive or complex.

Return type:

None

add_property_deletion_override(property_path)

Adds an override that deletes the value of a property from the resource definition.

Parameters:: property_path (str) – The path to the property.
Return type:: None

add_property_override(property_path, value)

Adds an override to a resource property.

Syntactic sugar for addOverride("Properties.<...>", value).

Parameters:

property_path (str) – The path of the property.
value (Any) – The value.

Return type:

None

apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)

Sets the deletion policy of the resource based on the removal policy specified.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:

Parameters:

policy (Optional[RemovalPolicy]) –
apply_to_update_replace_policy (Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: true
default (Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resource, please consult that specific resource’s documentation.

See:

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-deletionpolicy.html#aws-attribute-deletionpolicy-options

Return type:

None

get_att(attribute_name, type_hint=None)

Returns a token for an runtime attribute of this resource.

Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.

Parameters:

attribute_name (str) – The name of the attribute.
type_hint (Optional[ResolutionTypeHint]) –

Return type:

Reference

get_metadata(key)

Retrieve a value value from the CloudFormation Resource Metadata.

Parameters:

key (str) –

See:

Return type:

Any

https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/metadata-section-structure.html

Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.

inspect(inspector)

Examines the CloudFormation resource and discloses attributes.

Parameters:: inspector (TreeInspector) – tree inspector to collect and process attributes.
Return type:: None

obtain_dependencies()

Retrieves an array of resources this resource depends on.

This assembles dependencies on resources across stacks (including nested stacks) automatically.

Return type:: List[Union[Stack, CfnResource]]

obtain_resource_dependencies()

Get a shallow copy of dependencies between this resource and other resources in the same stack.

Return type:: List[CfnResource]

override_logical_id(new_logical_id)

Overrides the auto-generated logical ID with a specific ID.

Parameters:: new_logical_id (str) – The new logical ID to use for this stack element.
Return type:: None

remove_dependency(target)

Indicates that this resource no longer depends on another resource.

This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.

Parameters:

target (CfnResource) –

Return type:

None

replace_dependency(target, new_target)

Replaces one dependency with another.

Parameters:

target (CfnResource) – The dependency to replace.
new_target (CfnResource) – The new dependency to add.

Return type:

None

to_string()

Returns a string representation of this construct.

Return type:: str
Returns:: a string representation of this resource

Attributes

CFN_RESOURCE_TYPE_NAME = 'AWS::EC2::SecurityGroup'

attr_group_id

The ID of the security group, such as sg-94b3a1f6 .

CloudformationAttribute:: GroupId

attr_id

The group name or group ID depending on whether the SG is created in default or specific VPC.

CloudformationAttribute:: Id

attr_vpc_id

The ID of the VPC, such as vpc-0669f8f9 .

CloudformationAttribute:: VpcId

cfn_options: Options for this resource, such as condition, update policy etc.

cfn_resource_type: AWS resource type.

creation_stack

return:

the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.

group_description: A description for the security group.

group_name: The name of the security group.

logical_id

The logical ID for this CloudFormation stack element.

The logical ID of the element is calculated from the path of the resource node in the construct tree.

To override this value, use overrideLogicalId(newLogicalId).

Returns:

the logical ID as a stringified token. This value will only get resolved during synthesis.

node: The tree node.

ref

Return a string that will be resolved to a CloudFormation { Ref } for this element.

If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).

security_group_egress: The outbound rules associated with the security group.

security_group_ingress: The inbound rules associated with the security group.

stack

The stack in which this element is defined.

CfnElements must be defined within a stack scope (directly or indirectly).

tags: Tag Manager which manages the tags for this resource.

tags_raw: Any tags assigned to the security group.

vpc_id: The ID of the VPC for the security group.

Static Methods

classmethod is_cfn_element(x)

Returns true if a construct is a stack element (i.e. part of the synthesized cloudformation template).

Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.

Parameters:

x (Any) –

Return type:

bool

Returns:

The construct as a stack element or undefined if it is not a stack element.

classmethod is_cfn_resource(x)

Check whether the given object is a CfnResource.

Parameters:

x (Any) –

Return type:

bool

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

EgressProperty

class CfnSecurityGroup.EgressProperty(*, ip_protocol, cidr_ip=None, cidr_ipv6=None, description=None, destination_prefix_list_id=None, destination_security_group_id=None, from_port=None, to_port=None)

Bases: object

Adds the specified outbound (egress) rule to a security group.

An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a destination security group. For more information, see Security group rules .

You must specify exactly one of the following destinations: an IPv4 address range, an IPv6 address range, a prefix list, or a security group.

You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

Parameters:

ip_protocol (str) – The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ). Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
cidr_ip (Optional[str]) – The IPv4 address range, in CIDR format. You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId . For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
cidr_ipv6 (Optional[str]) –
The IPv6 address range, in CIDR format. You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId . For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
description (Optional[str]) – A description for the security group rule. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*
destination_prefix_list_id (Optional[str]) – The prefix list IDs for the destination AWS service. This is the AWS service that you want to access through a VPC endpoint from instances associated with the security group. You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .
destination_security_group_id (Optional[str]) – The ID of the destination VPC security group. You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .
from_port (Union[int, float, None]) – If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).
to_port (Union[int, float, None]) – If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

egress_property = ec2.CfnSecurityGroup.EgressProperty(
    ip_protocol="ipProtocol",

    # the properties below are optional
    cidr_ip="cidrIp",
    cidr_ipv6="cidrIpv6",
    description="description",
    destination_prefix_list_id="destinationPrefixListId",
    destination_security_group_id="destinationSecurityGroupId",
    from_port=123,
    to_port=123
)

Attributes

cidr_ip

The IPv4 address range, in CIDR format.

You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-cidrip

cidr_ipv6

The IPv6 address range, in CIDR format.

You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-cidripv6

description

A description for the security group rule.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-description

destination_prefix_list_id

The prefix list IDs for the destination AWS service.

This is the AWS service that you want to access through a VPC endpoint from instances associated with the security group.

You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-destinationprefixlistid

destination_security_group_id

The ID of the destination VPC security group.

You must specify exactly one of the following: CidrIp , CidrIpv6 , DestinationPrefixListId , or DestinationSecurityGroupId .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-destinationsecuritygroupid

from_port

If the protocol is TCP or UDP, this is the start of the port range.

If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-fromport

ip_protocol

//www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml>`_ ).

Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-ipprotocol
Type:: The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see `Protocol Numbers <https
Type:: //docs.aws.amazon.com/http

to_port

If the protocol is TCP or UDP, this is the end of the port range.

If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-egress.html#cfn-ec2-securitygroup-egress-toport

IngressProperty

class CfnSecurityGroup.IngressProperty(*, ip_protocol, cidr_ip=None, cidr_ipv6=None, description=None, from_port=None, source_prefix_list_id=None, source_security_group_id=None, source_security_group_name=None, source_security_group_owner_id=None, to_port=None)

Bases: object

Adds an inbound (ingress) rule to a security group.

An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules .

You must specify exactly one of the following sources: an IPv4 address range, an IPv6 address range, a prefix list, or a security group.

You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

Parameters:

ip_protocol (str) –
The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see Protocol Numbers ). Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
cidr_ip (Optional[str]) –
The IPv4 address range, in CIDR format. You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId . For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
cidr_ipv6 (Optional[str]) –
The IPv6 address range, in CIDR format. You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId . For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
description (Optional[str]) – Updates the description of an ingress (inbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*
from_port (Union[int, float, None]) – If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).
source_prefix_list_id (Optional[str]) – The ID of a prefix list.
source_security_group_id (Optional[str]) – The ID of the security group.
source_security_group_name (Optional[str]) – [Default VPC] The name of the source security group. You must specify either the security group ID or the security group name. You can’t specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access. For security groups in a nondefault VPC, you must specify the group ID.
source_security_group_owner_id (Optional[str]) – [nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account. You can’t specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access. If you specify SourceSecurityGroupName or SourceSecurityGroupId and that security group is owned by a different account than the account creating the stack, you must specify the SourceSecurityGroupOwnerId ; otherwise, this property is optional.
to_port (Union[int, float, None]) – If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

See:

http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html

ExampleMetadata:

fixture=_generated

Example:

# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2

ingress_property = ec2.CfnSecurityGroup.IngressProperty(
    ip_protocol="ipProtocol",

    # the properties below are optional
    cidr_ip="cidrIp",
    cidr_ipv6="cidrIpv6",
    description="description",
    from_port=123,
    source_prefix_list_id="sourcePrefixListId",
    source_security_group_id="sourceSecurityGroupId",
    source_security_group_name="sourceSecurityGroupName",
    source_security_group_owner_id="sourceSecurityGroupOwnerId",
    to_port=123
)

Attributes

cidr_ip

The IPv4 address range, in CIDR format.

You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId .

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-cidrip

cidr_ipv6

The IPv6 address range, in CIDR format.

You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId .

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-cidripv6

description

Updates the description of an ingress (inbound) security group rule.

You can replace an existing description, or add a description to a rule that did not have one previously.

Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-description

from_port

If the protocol is TCP or UDP, this is the start of the port range.

If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-fromport

ip_protocol

//www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml>`_ ).

Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-ipprotocol
Type:: The IP protocol name ( tcp , udp , icmp , icmpv6 ) or number (see `Protocol Numbers <https
Type:: //docs.aws.amazon.com/http

source_prefix_list_id

The ID of a prefix list.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-sourceprefixlistid

source_security_group_id

The ID of the security group.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-sourcesecuritygroupid

source_security_group_name

[Default VPC] The name of the source security group.

You must specify either the security group ID or the security group name. You can’t specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.

For security groups in a nondefault VPC, you must specify the group ID.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-sourcesecuritygroupname

source_security_group_owner_id

[nondefault VPC] The AWS account ID for the source security group, if the source security group is in a different account.

You can’t specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.

If you specify SourceSecurityGroupName or SourceSecurityGroupId and that security group is owned by a different account than the account creating the stack, you must specify the SourceSecurityGroupOwnerId ; otherwise, this property is optional.

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-sourcesecuritygroupownerid

to_port

If the protocol is TCP or UDP, this is the end of the port range.

If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

See:: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-securitygroup-ingress.html#cfn-ec2-securitygroup-ingress-toport